FOLLOW FOCUS V2 FEATURES : Both sides drive gear fitting as per lens convenience. Gears inside gearbox made of metal. Completely gear driven design for slip-free and accurate movement. Adjustable slide mounting mechanism to fit any lens diameter. Adjustable locking system. Mounts onto 15 mm Rod Support (60mm center to center difference). Positional indicator. Standard accessory port. Allows extremely focusing lenses to be geared and used with follow focus industry standard 0.8 module. Fits most lenses with proper focus gear drive (Interchangeable gear drives (currently shipping 0.8/2.51mm pitch).
FOLLOW FOCUS V2 SPECIFICATION : Gear Arm adjustable distance : 35 mm Construction : Follow Focus - Aluminum Black Anodized ,Gears - ABS Dial Index Adjustment : 360o Dial
Outside Diameter : 84mm (of white wheel) Fit Rail Dia : 15 mm Fit Rail Distance : 60 mm Dimensions : 175(L) 110(H) 110(W) 
Exchangeable Gear Drive for : Fujinon/Canon/Kinor Gear Wt. : .006 gms Follow Focus Wt. : 310 gms Wt with packing : 1.5Kgs Gear Dia : 35.87mm LENS & CAMERA ARE NOT INCLUDED
PROAIM MATTE BOX :
PROAIM Mattebox is specially designed for all dv / hdv cameras with normal and wide angle lenses.
PROAIM Matte Boxes control light better than a regular lens shade and offer the videographer the ability to use high quality 4x4 filters for image effects.
This matte box IS easily deattachable. It is light in weight but is made up of strong material.
The PROAIM sunshade mattebox is a simple and unique in design used to reduce extra sunlight on the lens. It works same the lens hood.
PROAIM Mattebox comes with both 4:3 and 16:9 aspect ratio format so that this mattebox can be used with both normal as well as wide angle lenses. 4:3 and 16:9 ratio mask can easily be attached or diattached with four small screws in the front of the mattebox.
Sunshade/filterholder features a non-reflective retangular shade that allows for single or dual filter applications. This Mattebox has two 4"x4" filter holders; perfect for polarizers and combination of square filters. Rotating filter holder enables user to eject or instal square filter without disturbing microphone or flash settings.
FRONT ADJUSTER : Front Adjuster attaches mattebox to the 15mm rods. The front adjuster is made of metal. It is designed with quick lock mechanism.
FOAM DONUT RINGS : Mattebox with rod support attaches to the DV cameras in such a way that only a soft foam cussioned lens ring (DONUT) contacts lens barrel, so you don't have to worry about your lens during the bumps and grinds of capturing exciting footage. Kit includes five donut with inner diameter 81mm, 78mm, 75mm, 65mm, 54mm.
FOR EX1 Camera Only :
Adapter Ring for EX1 camera : Usually problem occurres with Sony PMW-EX1 while attaching the mattebox. Its mic is too below & comes in the way of mattebox.
So, we provide an Adapter Ring 95-77mm for EX1 camera to use the mattebox successfully on EX1 camera. Those have EX1 camera, kindly leave the note on your order for sending the Adapter Ring
PROAIM RAIL SYSTEM : PROAIM Rail System for Mattebox and Follow Focus is flexibly designed light weight equipment allowing a camera operator to work indivertibly and be more precise and efficient. Rail System provides rock-solid support for all your on-camera accessories: DOF Cinema Lens Adapter, Follow Focus, Matte Box and lens support for the front of the camera. SPECIFICATION : stainless steel Rods, Rail Dia : 15 mm, Rail Distance : 60 mm, Length of Rails : 450mm (45cm) Weight : 1.5 kgs
QUICK RELEASE AND BASE PLATE : PROAIM Quick Release Plates will fit almost to every camera and will prevent your camera from rotating or moving on the plate.
Quick Release Plates are designed to allow access to all cameras controls and functions without removing the plate. Quick release plates are designed to provide maximum contact area to the bottom of the camera increasing stability and helping to minimize flexing of the camera body.
PROAIM Base Plate can be mounted on the tripod easily. For the ultimate in light weight and flexibility, offers PROAIM Mattebox with follow focus & Rail System. Featuring dual mounting rods for added strength and accessory attachment mounts, the PROAIM Follow Focus is ready for most demanding shots. Obtaining a Follow Focus with full assembly with such control, precision and accuracy at the most affordable price is a blazing revolution in the price trend.