400W Mobile Lamp Handy Bowl Flash Strobe Light Kit
SKU581
This flash is designed specially with unique functions, lightweight to carry, safety to use and powerful enough to support your capture shooting and outdoor photography. There are there ways to trigger the lamp：One is using a SYNC cord connect with the lamp which can control directly and synchronously. There is a test button on the lamp that you can know whether connected or not.
Another way is light control, while the flashgun is working, the optical receiver in the lamp will receive it and control the lamp synchronously.
A wireless remote trigger kit is also included in the package, plug the receiver into the SYNC socket and set the transmitter on to the camera, then the flash also can be triggered. The power of the flash can be adjusted from 1 to 9 showed on the LED screen, means:
1 stands for the minimum power, 9 for the maximum power, and so forth. There are 9 steps of flash output.
L: Low battery, it needs recharging. E: If keep low battery for 10 seconds, E appears for the reason that battery is used up, or that battery or battery pack is overheated and protected by software. If caused by the latter, please turn off the power and stop to use in 10-20 minutes. The installation is easy as ABC, just following the installation flash's steps, any questions about the usage please do not hesitate to contact us! Feature Power (WS) 400WS GN 52 Power Contol 9 steps Modeling Lamp 12V 20WS Recycle Time 1.8s Illumination Angle 65° Rated Voltage of the Charger AC220V/50HZ-60HZ/DC12V Battery Rechargeable battery Battery Charge Mode Exclusive Charger Battery Loading & Unloading Built-in (replaceable) Full Charge Indicator Green light Package Included Outdoor flash Kit (All showed in the above picture) x1 Original Manufacture Package x1
!
<<
|
Seulement :
|